Saturday, 23 July 2016

PROJECT 2: UNDERSTANDING FORCES IN BUILDING CONSTRUCTION

INTRODUCTION
A building normally comprises of several different types of constructional systems, either due to its function or building code requirements. As designers, it is very important that you understand when and where each of the different type of constructional system is used. Today, tensile and grid shell construction methods are becoming widely used structures for building support. It provides the required load bearing resistance and aesthetics required by designers. Today, technological advancement is creating the path for innovations in building construction through exploration of materials, construction techniques and information technologies to produce more effective design approaches and features that will suit the designers’ preferences, and environment needs. 

OBJECTIVE
  • To create an understanding of building components used and its assembly.
  • To demonstrate good drawing skills in building details and how it reacts under loading and force.
  • To be able to manipulate the selection of materials used and ensure its buildability. 

LEARNING OUTCOME
In this project, we were able to:
  • Identifications of basic structural systems in construction
  • Differentiate in terms of loads and forces acting on structural elements
  • Recognize and apply the implications of construction system in design
  • Analyse the issues of strength, stiffness and stability of structures including modes of structural systems, forces, stress and strain and laws of static.
METHODOLOGY
Group Task
  1. We are to propose a building (tensile/membrane construction or grid shell construction) and identify the structural systems used in the construction of the building of your choice. 
  2. Describe each structural system identified in terms of Function, Material and Load Distribution.
  3. Produce a model on an A3 base showing the structural systems used in the above building. A detailed model showing appropriate constructional joints is encouraged.
  4. Suitable scale and material to be used for the construction of the model shall depend entirely on us. Quality and workmanship of the model produced will be considered in the assessment of this project.
  5. We are then required to prepare ONE (1) A2 size sheet, utilizing both sides of the sheet. It includes, analysing the success or failure of the model together with the mitigating measures. We are also to include a brief introduction of the building, construction method from its sub-structure to super structure, modelling process as well as detailing of different parts of the buildings to show how it is constructed.
  6. We are encouraged to use annotated sketches / diagrams to explain the forces, structural movement experienced.
  7. Additional to the above requirements, we will also need to manually draw one (1) exploded Axonometric construction detail. This includes plan, elevation and section as key reference – printed.
  8. The details must be complete with annotations, specifications as well as references to show our understanding on how the building is constructed.
  9. Use appropriate scale for the detailing. 
  10. Photographs of the model and the process in making the model should also be incorporated into this A2 sized sheet. 11. The model and A2 sheet must be complete with title block format with student’s name, student ID and Tutor-In-Charge.

PROCESS MODEL







FINAL BOARD








PROJECT 1 : SKELETAL CONSTRUCTION (TEMPORARY BUS SHELTER)

OBJECTIVE
  • To create an understanding of skeletal structure and its relevant structural components.
  • To understand how a skeletal structure reacts under loading.
  • To demonstrate a convincing understanding of how skeletal construction works.
  • To be able to manipulate skeletal construction to solve an oblique design problem.

LEARNING OUTCOME
After this project, we were able to:
  • Apply construction system in design.
  • Recognize the implication of construction systems in design.
  • Analyse the issues of strength, stiffness and stability of structures including modes of structural systems, forces, stress and strain and laws of static.

SPECIFICATION
  • SCALE-Your bus shelter should be constructed to accommodate 5-6 people (1:20). 
  • Max height is 600mm. Max base size is 400mm x 800mm
  • CONSTRUCTION- It should demonstrate the knowledge of skeletal frames and its joints. It must clearly define all building components such as roof, column, walls and floor. The structure should be elevated at least 50mm from the ground.
  • JOINTS-The joints should be constructed to reflect actual joints. For example, if a group chooses recycle steel materials for the frame, the joints should be made to resemble bolts and nuts etc. You are not allowed to use inappropriate materials for joints such as rope for steel.
  • MATERIALS- You are encouraged to use recycled materials such as newspaper, pet bottles, cans, etc. However, the chosen materials must relate to its function. For example, roofing materials should not be made from newspaper.
  • OTHER DESIGN CONSIDERATIONS- This is just a minor component however; the shelter should be light and portable. o Resistant to weather. o Allows easy access in and out from the shelter o Shelter SHOULD NOT BE OVERLY DESIGN and must conform to the design criteria.
  • TEST-The completed shelter will be tested to withstand lateral forces. In actual situation, from wind and earthquakes or any horizontal forces.
  • Analysis on the design, construction progress and test results are to be provided in the form of an A3 bound report.
  • Students are encouraged to use annotated sketches / diagrams to explain the construction, joints, forces, structural movement experienced during the testing of the shelter.
  • Photographs of the shelter should also be incorporated into the presentation report. 

PROCESS OF CONSTRUCTION































FINAL BOARD & MODEL